Buyer's Guide
What to Look for in a Floor Tiles Manufacturer in Morbi
Morbi makes most of India's floor tiles, which means plenty of choice and plenty of variation in quality. Here's what actually separates manufacturers worth ordering from.
Body type: pressed vs vitrified
Pressed ceramic floor tiles are cheaper and lighter, fine for most residential floors. Vitrified tiles — double-charge or full-body — are denser, more water- and stain-resistant, and better suited to commercial floors or markets where buyers expect a glossier, more uniform finish. Ask which body type a manufacturer actually runs in-house versus trades from a third party; it affects both price and consistency between batches.
Certifications that actually matter
ISO 9001 tells you the factory has a documented quality process, not that every tile is perfect — it's a baseline, not a guarantee. If you're importing into the EU, ask about CE marking. For some Middle East and African markets, buyers ask for a certificate of conformity or SASO/G-Mark depending on destination. Confirm what your destination market actually requires before you assume a certificate covers you.
Minimum order quantities and container loads
Most Morbi manufacturers quote by the container, not the box — a 20ft container typically takes 850-900 m² of standard floor tile, a 40ft roughly double that, though it varies by tile thickness and packing. If your order doesn't fill a container alone, ask about consolidating with other products (we do this routinely — see our note on wholesale consolidation).
Quality checks before you commit
Ask for a pre-shipment inspection report covering size tolerance, warpage and surface defects, not just a photo of a finished pallet. For a first order, request physical samples rather than relying on catalogue images — glaze and shade can vary more than photos show. Our quality control page covers the checks we run before anything ships.
Talk to our export desk More guides
Frequently asked questions
What's the difference between ceramic and vitrified floor tiles?
Ceramic tiles are pressed and fired at lower temperatures, making them lighter and cheaper but more porous. Vitrified tiles are fired at higher temperatures to a denser, less porous body, giving better water and stain resistance — the usual choice for commercial floors or humid markets.
What MOQ should I expect from a Morbi manufacturer?
Most quote by container rather than a fixed box count — commonly a 20ft or 40ft container as the practical minimum. Smaller orders are usually possible by consolidating with other tile types or products in one container.
Can I get samples before placing a full order?
Yes, and we'd recommend it for a first order — glaze shade and surface finish can look different in person than in a catalogue photo.